Anybody have one of these used for sale?
Anybody have one of these used for sale?
Anybody using this? Pros and Cons? Its a hub extension that warp drive sells. I need one to set my prop back a couple of inches because its too close to the front of my cage
- Attachments
-
- zCatExtensions(100).jpg (1.95 KiB) Viewed 1298 times
13-6x7-6 Hamant Ultra-lite,Custom TIG Stainless rigging,1.7 Rotator,Supercharged 480,Electronic Ignition,80 inch 3BLD R,B&S trailer
Re: Anybody have one of these used for sale?
Those are for airplanes if I'm not mistaken. Like experimentals. Not a rank igso540..
-
- Southern Airboat Member
- Posts: 2898
- Joined: Tue Aug 12, 2008 8:07 pm
- Location: orlando
Re: Anybody have one of these used for sale?
I have one on my 540 but mine bolts to the crank were the gear box use to. I cant say I use one if I did not require one.
move the stand.
move the stand.
Re: Anybody have one of these used for sale?
That looks eerily like the ones that Air Tech Sells.
If they're machined from a chunck of billet, they must be one strong dude.
http://www.airtecinc.us/airboat/index.html
They are about half way down the page.
Call them, they should know how much power they can stand.
If they're machined from a chunck of billet, they must be one strong dude.
http://www.airtecinc.us/airboat/index.html
They are about half way down the page.
Call them, they should know how much power they can stand.
"The suppression of uncomfortable ideas may be common in religion and politics,
but it is not the path to knowledge; it has no place in the endeavor of science." - Carl Sagan
but it is not the path to knowledge; it has no place in the endeavor of science." - Carl Sagan
- HomesteadGator
- Southern Airboat Member
- Posts: 107
- Joined: Sun Aug 09, 2009 1:02 am
Re: Anybody have one of these used for sale?
I have one that is 3'' long. i sent you a pm
FTD RACING
Re: Anybody have one of these used for sale?
Sent you a PM. Thanks. Im not 100% sure i need one yet i have to do some testing to see how much the Saber is gonna flex under full load on this geared monsterHomesteadGator wrote:I have one that is 3'' long. i sent you a pm

13-6x7-6 Hamant Ultra-lite,Custom TIG Stainless rigging,1.7 Rotator,Supercharged 480,Electronic Ignition,80 inch 3BLD R,B&S trailer
- air-roberts
- Site Supporter - IV
- Posts: 1799
- Joined: Sat Jun 27, 2009 8:01 am
- Location: cocoa / canaveral groves
Re: Anybody have one of these used for sale?
not only just to clear your cage but moving the prop back more also gives more push. it confuses alot of people cause if you check it close then move it back not changing the pitch you lose rpm but gain thrust because the blades get more undisturbed air to it
Air-Roberts
experimenting with old step w/t experimental 384.8 c.i. nos 2.68 rotator, 80" three bld ? R
http://www.bcraceengineering.com
Thanks to dave http://waterthunder.com/
New & Used PROPs
WhirlWind prop dealer

experimenting with old step w/t experimental 384.8 c.i. nos 2.68 rotator, 80" three bld ? R
http://www.bcraceengineering.com
Thanks to dave http://waterthunder.com/
New & Used PROPs
WhirlWind prop dealer
Re: Anybody have one of these used for sale?
Makes sense. Good to know. Thanksair-roberts wrote:not only just to clear your cage but moving the prop back more also gives more push. it confuses alot of people cause if you check it close then move it back not changing the pitch you lose rpm but gain thrust because the blades get more undisturbed air to it
13-6x7-6 Hamant Ultra-lite,Custom TIG Stainless rigging,1.7 Rotator,Supercharged 480,Electronic Ignition,80 inch 3BLD R,B&S trailer
Re: Anybody have one of these used for sale?
Yep, I've seen that with a 4" on a DD caddy. Proves that clean air is the name of the game. After seeing that, it made me start wondering about some of the cages I've seenair-roberts wrote:not only just to clear your cage but moving the prop back more also gives more push. it confuses alot of people cause if you check it close then move it back not changing the pitch you lose rpm but gain thrust because the blades get more undisturbed air to it


"The suppression of uncomfortable ideas may be common in religion and politics,
but it is not the path to knowledge; it has no place in the endeavor of science." - Carl Sagan
but it is not the path to knowledge; it has no place in the endeavor of science." - Carl Sagan