Oxbox

vacrin · Post by **vacrin** » Tue Feb 04, 2014 10:38 am

Who bought the Oxbox business from Dan?

SkinnerBack · Post by **SkinnerBack** » Tue Feb 04, 2014 11:11 am

Brian with quickslick

billybob · Post by **billybob** » Tue Feb 04, 2014 2:24 pm

Brian Krug/ Quick Slick is now the owner. You can reach him at 863-581-9710. Hopefully by the end of this year I will have a new boat built with an OX box behind it.

SWAMPHUNTER45 · Post by **SWAMPHUNTER45** » Tue Feb 04, 2014 2:29 pm

Had communication with him last week and he had units in stock.

Dixiedog60 · Post by **Dixiedog60** » Wed Feb 05, 2014 9:44 am

Just got my new 2.68 and it sure is pretty

Smooth as Smooth can be!

atvracer16 · Post by **atvracer16** » Wed Feb 05, 2014 10:22 am

Why did Dan sell it?

:) · Post by :) » Wed Feb 05, 2014 10:43 am

Seems he just couldn't keep up with demand?

ptillman · Post by **ptillman** » Thu Feb 06, 2014 10:46 am

Brian sent me some pics yesturday, and they look great. I am meeting up with him to put eyes and hands on one. Brian also gives a 2 year warranty on the new boxes. Great work Brian!!!

atvracer16 · Post by **atvracer16** » Thu Feb 06, 2014 12:28 pm

Does Dan still sell other stuff though such as props and what not?

ptillman · Post by **ptillman** » Thu Feb 06, 2014 1:12 pm

atvracer16 wrote:Does Dan still sell other stuff though such as props and what not?

I think Dan is pretty much out of airboats for now.

akblackdawg · Post by **akblackdawg** » Thu Feb 06, 2014 1:29 pm

I almost bought one in Oct but could not get it fast enough to keep up with my fall hunting so I bought a Balistic instead. I am sure they are both good, I'm happy with the balistic 2.7 but don't have many hours on it yet. Hope Oxbox does well, they seem like a good product to me, and well tested so far. Bud

billybob · Post by **billybob** » Thu Feb 06, 2014 1:29 pm

Brian Sells props at QuickSlick/Ox drives. Give Brian a call. Extremely knowledgable.

ptillman · Post by **ptillman** » Thu Feb 06, 2014 1:31 pm

Here is what Brian sent to me.

billybob · Post by **billybob** » Thu Feb 06, 2014 2:14 pm

ptillman wrote:Here is what Brian sent to me.

Did you order a show finish or is that box just machined?

billybob · Post by **billybob** » Thu Feb 06, 2014 2:15 pm

ptillman wrote:Here is what Brian sent to me.

Did you order a show finish or is that box just machined?

fl cracker · Post by **fl cracker** » Thu Feb 06, 2014 2:15 pm

Those boxes look sick!

ptillman · Post by **ptillman** » Thu Feb 06, 2014 4:06 pm

That is just a look at what he has to offer.

Joe863 · Post by **Joe863** » Thu Feb 06, 2014 5:10 pm

That is one SWEET looking box.

getchasumairboats · Post by **getchasumairboats** » Thu Feb 06, 2014 5:16 pm

Those boxes are Sexy . Will be installing an anodized black one soon.

vacrin · Post by **vacrin** » Fri Feb 07, 2014 9:12 pm

Just wanted to let everyone know that I can't speak highly enough about Brian Krug, Ox Drive Reductions. When Brian was looking at buying the business he noticed a deal I had made with Dan that involved a Stinger I sent to him as down payment on a new Ox Drive that Dan never produced. Brian assured me he would honor the deal if he bought the business. I kinda figured I had just lost that drive, with it getting stuck in the middle of the business sale. Well, I called Brian earlier this week to check on things and I had a brand new Ox Drive delivered today. Absolutely the most beautiful gear reduction I have ever seen. If Brian continues to handle his business with the integrity I have seen from him I have no doubt it will be successful. I can't say I recommend the drive yet but I can definitely recommend the company. Thanks Brian.

fl cracker · Post by **fl cracker** » Fri Feb 07, 2014 9:32 pm

Brian and His wife are going to do very well with this. They are great honest folks to deal with!

dirtracer4 · Post by **dirtracer4** » Sat Feb 08, 2014 9:41 pm

vacrin wrote:Just wanted to let everyone know that I can't speak highly enough about Brian Krug, Ox Drive Reductions. When Brian was looking at buying the business he noticed a deal I had made with Dan that involved a Stinger I sent to him as down payment on a new Ox Drive that Dan never produced. Brian assured me he would honor the deal if he bought the business. I kinda figured I had just lost that drive, with it getting stuck in the middle of the business sale. Well, I called Brian earlier this week to check on things and I had a brand new Ox Drive delivered today. Absolutely the most beautiful gear reduction I have ever seen. If Brian continues to handle his business with the integrity I have seen from him I have no doubt it will be successful. I can't say I recommend the drive yet but I can definitely recommend the company. Thanks Brian.

Are you using this drive or going with a belt? What ratio is it?

JAMES · Post by **JAMES** » Wed Feb 12, 2014 9:36 pm

brian is a stright up good guy !! hope he makes it work

junglecat · Post by **junglecat** » Tue Feb 18, 2014 10:24 pm

I had box #8 and this is box#23 , over a year old . It looks and runs just like the day I got it.

Striker543 · Post by **Striker543** » Wed Feb 19, 2014 7:50 am

What happened to box #8? Did it die with the old engine?

Airboating Community & Resource

Airboats For Sale

Airboat Parts

Other Boats

Automotive

Other

More Links

Southern Airboat Forum

Regional Airboating Forum

Other Interesting Stuff

Archives

Member Links

Public Links

Member Links

Oxbox

Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox

Re: Oxbox