O-320 Narrow Deck Case O-360 conversion

[JCGator]

Does anyone have a picture of a Narrow Deck O-320 case that has been ground down to clear an O-360 crank/rods?

[Gary S]

Use a wide deck case and you don't have to.

[jtstric3]

I Dnt have photo of when I did mine but your going to want to have crank and rods attached and mark case I had 0-290 gpu case so I had to take off where rods bolts where touching case and where rod cap came and touched back side of case

[JCGator]

thanks jtstric3