Adding Ls/gear reduction to a dd rigging

[90chevy396]

You are using the ict billet bracket

 

[12ftgso480]

You are using the ict billet bracket

Are you running the 2nd bracket and 3rd bolt. The picture you posted I only see the 2 ? When I originally ordered this bracket I didn't realize you there's a second bracket for the iron blocks

 

[12ftgso480]

Dual captain ! Didn't notice how close passenger is to tensioner pulley/ belt. May try to relocate it or cover some how. Would hate for a pony tail to get caught in there.

 

[12ftgso480]

Getting closer !!

 

[FrannyStephLux]

This is always interesting. Can't get enough of these

 

[12ftgso480]

Not your traditional headers. Will it work?¿

 

[12ftgso480]

Now to fab the rudders a new mount

 

[12ftgso480]

We made a hit! First time on the ground was a success. With a baseline tune ( factory harness and intake ) we set the prop and was turning motor 4600 at wot. After seeking council from a friend Decided what the heck let's see what it does. Took off and ran through the pasture phenomenally. This is a ironblock 6.0 trucknorris cam and springs. 2.1:1 gear with a 79" 2 blade R series 13" wide. 15' boat 7' 6" wide in middle with fairly deep sides. Hoping with a good tune our pitch is close to right