• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

5.3 ls pluming

Jonahr55

Member
Where do I plum up the end of the steam tube coming out of intake to ? Does it go to overflow tank up above motor on the cage ?
 

Attachments

  • 9A8F3C96-7051-4FD7-92FE-89FB96C512B3.jpeg
    9A8F3C96-7051-4FD7-92FE-89FB96C512B3.jpeg
    286 KB · Views: 257
  • 8D35A96C-2B98-45BE-9EAC-600026866159.jpeg
    8D35A96C-2B98-45BE-9EAC-600026866159.jpeg
    185.1 KB · Views: 258
  • 8CA4F104-4230-4BE3-A70C-752706AC8082.jpeg
    8CA4F104-4230-4BE3-A70C-752706AC8082.jpeg
    238.5 KB · Views: 258
I would not run it to the overflow as an overflow is not a pressurized part of the system.

Typically there is an expansion tank which is a pressurized part of the system. That is were I connect my stream line.

Overflow tank line usually connects to the expansion tank at the radiator cap location.

Just my 2 cents
 
Expansion tank was what I was referring to not overflow, shoulda clarified that! One eyed is correct! Needs to be plumbed into the system that allows to circulate i.e. expansion tank not overflow. Good call!
 
T all 4 of mine togeather and taped into filler neck .problem solved as I just redid my heads from not doing this a fast 600 mistake when said and done
 
Back
Top