My Wifes new Hamant ride boat!

Waterthunder · **Posted:** Thu Jul 15, 2010 8:50 am

It has been way to long since I had a ride boat! Wade at Hamant airboats just started my new hull. I looked at a ton of boats and I just appreciate some of the new things Wade has been doing like his new stringers and bow cap not to mention their new bottom. It's a 14.5 long with walk arounds and will seat 5 with stainless rigging I wish I never sold my old Hamant but I'm sure my new one will even run better if that's possible! If I get a chance I will post some pic's! This will be my first boat that will seat more then 3 people!

Sniper · **Posted:** Thu Jul 15, 2010 9:16 am

Dave what color you going with and what motor and you going to try out some of those new Sensenich blades out on it ?

Waterthunder · **Posted:** Thu Jul 15, 2010 10:48 am

It's gonna be Purple again I just couldn't find a color I liked better. It will be one of our EFI motors! I'm gonna run an R blade and try a few different ratios with the new motor combo! It will be the same color as this but the rigging will be stainless and the hull will be bigger with three seats!

plumcrazy · **Posted:** Thu Jul 15, 2010 10:59 am

i luv me some plum crazy purple dave

Waterthunder · **Posted:** Thu Jul 15, 2010 11:22 am

I'm a closet Mopar man, I will have to find a pic of my Plumb Crazy Purple Duster and post it!

plumcrazy · **Posted:** Thu Jul 15, 2010 11:25 am

went threw a long spell with mopar they will break the bank but man they will run :bom:

RiseAboveIt · **Posted:** Thu Jul 15, 2010 11:55 am

Dave, you every run the Alumitech? What is the biggest difference in it and the Hamant? Look close, but never get to see the Hamant over here?

Waterthunder · **Posted:** Thu Jul 15, 2010 11:59 am

As for production aluminum hulls I like the Hamant, Diamondback and Alumatec all three run great you will be very happy with an Alumatec I just like some of the minor detail stuff Hamant does and I love how they are rockets in the water!

C1gator · **Posted:** Thu Jul 15, 2010 12:09 pm

Hey Dave if u are ever in the hunt for a new wife, I dont look bad in heels..... :mrgreen:

Southern Style · **Posted:** Thu Jul 15, 2010 12:34 pm

.. Can you cook and clean???????????

Dave, I could not agree with you more. I have owned several of Hamants hulls.. and the new one with the rolled stringers, the rear cut swale, extra braces in the rear, and the "TRUE" dry box, not to mention he braces up the bow so it does not dent in when you jump on it... I could not be happier !!!!!!!!!!!!!!!!!!! He does AWSOME work...................... Man, can't wait to see your new ride... Congratz on getting another boat..

C1gator · **Posted:** Thu Jul 15, 2010 1:06 pm

Absolutely Southern...I can stew some grits.... :lol:

swamper2 · **Posted:** Sat Jul 17, 2010 8:02 am

what do rolled stringers do or look like?

Waterthunder · **Posted:** Sun Jul 18, 2010 4:47 pm

Here is a Tubed back half Duster I owned around 15 years ago she is Plumb Crazy Purple. I built a Nasty W2 headed small block Mopar nitrous motor for it!

plumcrazy · **Posted:** Sun Jul 18, 2010 4:56 pm

sweeet!! had some fat hides on that thing bet it would pull the tires up

BAD ADDICTION · **Posted:** Thu Jul 29, 2010 1:06 pm

I SEEN THE BOAT AT AIR BOAT INC. TODAY AND ITS BAD TO THE BONE. I HAVE A NEW HULL AND LIKE THE NEW THING'S THAT WADE IS DOING WITH THE HULLS. CANT WAIT TO GET MINE IN THE WATER. I THINK THEY ARE THE BEST ALL AROUND ALLUMINUM HULL BUILT .JMOP.

My Wifes new Hamant ride boat!

Who is online